Application of Laser Cladding Additive Manufacturing Technology in TRT Blade Manufacturing and Repair Process
DOI:
https://doi.org/10.61360/BoniGHSS242016750805Keywords:
laser cladding additive manufacturing technology, TRT blade manufacture, TRT blade repairAbstract
TRT blades, as the core components of turbojet engines, carry huge high temperature and high pressure working environment and complex mechanical stresses, and their manufacturing and repair processes have extremely strict requirements on materials and processes. Traditional repair methods are often faced with the problems of material waste, difficulty in recovering complex geometric structures, and difficulty in guaranteeing repair results. Laser cladding additive manufacturing technology, with its precise material deposition and efficient repair process, brings new opportunities for the manufacturing and repair of TRT blades. The purpose of this paper is to explore the key technology of laser cladding technology in improving the blade performance and optimizing the repair process and its practical effect in dealing with the complex working environment through the in-depth study of the application of laser cladding technology in TRT blades.
References
Chen, Z., Chen, Z., Zhu, Z., & Zhang Y. (2020). Research on aero-engine blade remanufacturing repair method based on reverse engineering. Aviation Manufacturing Technology, 63(Z2), 80-86+93.
Li, D., & Sui, C. (2013). Analysis and repair of fracture reason of rotor blade of No.5 TRT of Bensteel. Metallurgy Series, 2013(05), 42–43.
Liu, W., Chen, G., Liang, Z., & Zhang, Y. (2010). Manufacturing and repair technology of compressor rotor blade parts. Aviation Manufacturing Technology, 2010(22), 36–39.
Lu, B., Lin, X., Wang, B., & Wang, L. (2022). Research on the application of laser and additive manufacturing technology. Guangdong Science and Technology, 31(06), 50–52.
Lu, Y., & Quan, X. (2021). Research on manufacturing process of plain bearing based on laser cladding composite coating. Journal of Anhui Institute of Water Resources and Hydropower Technology, 21(03), 32–35.
Mi, J., & Wang, S. (2014). Repair process of TRT generator static lobe bearing cylinder blade. Metallurgical Power, 2014(08), 68–70.
Quan, X., Liu, R., & Han, S. (2021). Current status of research on friction and wear properties of materials based on additive and subtractive manufacturing technologies. Surface Engineering and Remanufacturing, 21(Z1), 25–28.
Zhang, Q., Yang, Z., & Zhou, Y. (2023). Application of laser cladding in civil aviation maintenance. Manufacturing and Upgrading Today, 2023(12), 141–143.
Published
Issue
Section
License
Copyright (c) 2024 Xiangyang Yin
This work is licensed under a Creative Commons Attribution 4.0 International License.
